What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Our Top Picks
Quick verdict: capacity versus convenience
The Bosch GTS15-10 and DeWalt DWE7491RS are portable jobsite saws with 10-inch blades, but their rip capacities put them in different lanes. Bosch lists 32½ inches to the right of the blade and 14 inches to the left. DeWalt lists 32½ inches right and 22 inches left. That extra left-side capacity matters when a cut needs to be made on the opposite side of the blade; it does not make the DeWalt wider for ordinary right-side ripping.
Both offer enough right-side capacity for a 4-by-8 sheet cut lengthwise into two roughly 24-inch-wide pieces. Neither saw should be treated as a substitute for proper sheet support: a full sheet is awkward and hazardous to feed alone. Choose the Bosch if its price or features suit your work and the left-side limit is acceptable. Choose the DeWalt if you regularly need wider left-side cuts or want its included rolling stand.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Rip capacity at a glance
| Feature | Bosch GTS15-10 | DeWalt DWE7491RS |
|---|---|---|
| Blade size | 10 inches | 10 inches |
| Maximum rip, right | 32½ inches | 32½ inches |
| Maximum rip, left | 14 inches | 22 inches |
| Motor rating | 15 amps | 15 amps |
| Stand | Gravity-Rise wheeled stand included | Rolling stand included |
Published capacity is the maximum fence-to-blade distance, not a promise that a long, heavy panel will stay stable without help. Check the current manufacturer specifications for the exact package you are buying; included stands and accessories can vary by listing.
What rip capacity means on the job
Rip capacity is the width of material the fence can guide between itself and the blade. The fence usually moves to the right for wide rips, which is why both saws’ 32½-inch right capacity is the key figure for breaking down sheet goods. That is enough to split a 48-inch-wide panel near its center, but the saw’s table does not support the whole panel. Use roller stands, a large outfeed table, or a helper who can support the sheet without steering it.
The left-side number comes into play for cuts with the fence positioned left of the blade. DeWalt’s 22 inches gives more room for those setups than Bosch’s 14 inches. This is useful for certain narrow-panel workflows and when a cut plan requires the fence on that side. It is not an 8-inch advantage on every cut, and it does not change the maximum right-side width.
Do not force a workpiece through because it is close to the saw’s limit. A panel that catches, twists, or lifts against the fence can bind the blade and kick back. Keep the stock flat against the table and fence, use a push stick for narrow rips, and avoid standing directly in line with the blade. For large panels, breaking them down with a track saw or circular saw before using the table saw may be safer and easier to control.
Fence, stand, and setup trade-offs
The DWE7491RS is a familiar pick for users who want a portable saw with a rolling stand ready to move around a site. Its rack-and-pinion fence adjustment is designed to keep the fence parallel as it moves; still, check alignment after transport and before precision work. A fence that is out of parallel can pinch stock against the blade or produce cuts that drift from the intended width.
The GTS15-10 also includes Bosch’s Gravity-Rise wheeled stand. That integrated setup is useful when one person needs to raise, move, and store the saw regularly. Compare folded dimensions and weight if you need to lift the saw into a vehicle: “portable” does not mean light, and stairs or a crowded van can make stand design more important than a small capacity difference.
Neither saw eliminates the need to verify blade-to-fence alignment, keep the blade guard and riving knife installed where the cut allows, or provide outfeed support. If a riving knife is removed for a cut, reinstall it as soon as the operation is finished. Poor support is a common failure point: a long offcut can tip, twist the workpiece, or pull the operator’s hands toward the blade.
Which one should you buy?
Buy the Bosch if most of your work is standard right-side ripping, you want a wheeled setup, and 14 inches of left capacity covers your occasional cuts. Its 32½-inch right capacity matches the DeWalt’s, so paying more solely for wider right-side ripping would not be justified. If the Bosch is the less expensive option where you shop, that can make it a sensible choice for a home workshop or general remodeling work.
Buy the DeWalt if you have a specific use for the additional 8 inches of left-side capacity, or if its fence and stand suit your routine better. That extra range is worthwhile when it avoids awkward repositioning or an additional setup. It is not a reason by itself to expect faster cutting: both are 15-amp, 10-inch saws, and blade choice, material, feed rate, and support affect results.
If sheet goods are your main workload, compare either saw with a track saw and guide rail. It can be easier to manage for breaking down full sheets before bringing smaller pieces to the table saw. For frequent narrow rips, a proper table-saw push stick is a more important purchase than chasing a few extra inches of capacity.
Check these details before ordering
Confirm the exact model number, included stand, and local price; retailers sometimes bundle accessories differently. Also check the electrical supply and the space needed to feed long stock. A 10-inch blade can cut common sheet goods, but maximum depth of cut is not the same as rip width, and thick hardwood may require a slower feed or a suitable blade.
For most buyers, the decision is straightforward: equal right-side capacity means the Bosch handles the same common wide rips, while the DeWalt wins when left-side reach is a real requirement. Let your actual cut layout, support setup, and transport needs decide—not the largest number on a spec sheet.